Equipment

Figure skates most visibly differ from ice hockey skates in having a set of large, jagged teeth called toe picks (also known as "toe rakes") on the front of the blade. The toe picks are used primarily in jumping and should not be used for stroking or spins. Toe pick designs have become quite elaborate in recent years and sometimes include additional teeth on the sides of the blade.

Blades

The figure skating blade is curved from front to back with a radius of about 2 metres. Recently, parabolic figure skating blades have been designed to increase skaters' stability on the ice. The blade is also hollow ground; a groove on the bottom of the blade creates two distinct edges, inside and outside. In figure skating it is always desirable to skate on only one edge of the blade, and never on both at the same time (which is referred to as a flat). The apparently effortless power and glide across the ice exhibited by elite figure skaters fundamentally derives from efficient use of the edges to generate speed.

Boots

Figure skating boots are traditionally made by hand from many layers of leather. In recent years, boots made of synthetic materials with heat-mouldable linings have become popular with many skaters because they combine strength with lighter weight than leather boots, and are easier to break in. The latest development in boot technology is a boot that is hinged at the ankle to provide lateral support while allowing more flexibility. Blades are mounted to the sole and heel of the boot with screws.

Pads and Guards

Other equipment used by skaters includes pads called butt pads or crash pads that are inserted into the trousers or stockings and provide relief from the pain of hard falls, especially when learning new jumps.

Another piece of equipment is the guard, which is put on the blade when the skater must walk in their skates when not on the ice. The guard protects the blade from dirt or material on the ground that may dull the blade. Soft blade covers (called soakers) are used to absorb condensation and protect the blades from rust when the skates are not being worn.

Clothing

Clothing worn while ice skating includes dresses and skirts for women. For competition, these pieces of clothing can be heavily beaded or trimmed, and cost up to thousands of pounds if designed by a top level dress-maker.

For practice, figure skaters of both sexes usually wear leggings or tight fitting, flexible pants. Tights are also worn with dresses and skirts and underneath leggings for extra warmth and aesthetic qualities.

Competition outfits for skaters of both sexes, especially in ice dance, are often theatrical and revealing, in spite of repeated attempts to ban clothing that gives the impression of "excessive nudity" or that is otherwise inappropriate for athletic competition.

Harness Systems

Some rinks use harness systems to help skaters learn jumps faster in a controlled manner. The rink installs a heavy-duty cable that is securely attached to two walls of the rink. A set of pulleys ride on the cable. The skater wears a vest or belt that has a cable or rope attached to it. That cable is threaded through the movable pulley on the cable above. The coach holds the other end of the cable and lifts the skater by pulling the cable. The skater can then practice the jump, with the coach assisting with the completion.